JM Mineral Wool (SAFB) fiber insulations are made from basalt rock and slag. This combination results in a non-combustible, sound attenuation product with a melting point of approximately 2150 F, which gives it excellent fire resistance properties. Mineral wool is a water repellent vapor permeable material. Most commonly installed in wood-stud cavities of interior and exterior walls, basements, ceilings, floors and crawl spaces.

Thermo-Sheath Non-Structural Sheathing (Green) can be used as air barrier, moisture barrier or draft stop. This is a proprietary wall sheathing consisting on a proprietary fibrous sheathing board laminated with a water-resistant adhesive to facers on one side or both sides. Available in 4’x8’ thermo-sheath or 4’x9’ thermo-sheath.

JM Corbond Open-cell Appendix X Spray Polyurethane Foam (ocx SPF) insulation is a two-component

Unfaced batt (no paper facing) insulation does not have a vapor retarder. Ideal for insulating interior walls for sound control and re-insulating attics. Available in different thicknesses, R-values, and widths to accommodate standard-sizes walls, crawl spaces, attics, and more.

Kraft-faced batt (paper facing) insulation has a standard vapor retarder that is easily cut to fit the cavity. This helps control moisture, mold, and draft in exterior walls. Check your local building codes for vapor retarder requirements.

Cellulose insulation GreenShield is a loose-fill product that is manufactured from recycled wood products, various paper products (primarily newspaper), for use in various blown in applications such as attics and wall cavities. This product is chemically treated to make it fungi resistant and fire retardant.

Cellulose insulation is the primary choice for loose fill attic installations. Cellulose forms a monolithic layer across the attic with a strong fiber matrix. This monolithic layer provides an excellent thermal barrier and as a result will provide excellent thermal perf

Radiant Barrier for attics is a perforated sheet made up of a single layer of polyethylene reinforcing scrim, boned to – and sandwiched between – two highly reflective metalized sheets. Roll comes in 4’x250’ NT Radiant Barrier.

Radiant Barrier for attics is a perforated sheet made up of a single layer of polyethylene reinforcing scrim, boned to – and sandwiched between – two highly reflective metalized sheets. Roll comes in 4’x250’ NT Radiant Barrier.